IBM Tivoli and Cisco manual Click Finish to close the installation, as shown in Figure

8. Click Finish to close the installation, as shown in Figure 6-68.

Figure 6-68 Successful completion of Cisco Trust Agent installation

9.If you have not created a Certs directory before the installation as described in “Prerequisites” on page 190 or you were not presented with the window shown in Figure 6-67 on page 197 during the installation, install the certificates manually using the ctaCert.exe utility. This utility is located in the CiscoTrustAgent subdirectory of the installation directory you selected in step

5 on page 195. The syntax for the command is shown below: ctaCert.exe /add "<path to the certificate file>" /store "Root"

For more information about the utility refer to the Administrator Guide for Cisco Trust Agent 2.0, which is available at (requires CCO login):

http://www.cisco.com/en/US/partner/products/ps5923/products_maintenance_guide_ book09186a008059a40e.html

198Building a Network Access Control Solution with IBM Tivoli and Cisco Systems