94Backing up, restoring, and cloning from DOS

Navigating without a mouse

To start the Norton Ghost executable

Do one of the following:

Insert a Ghost boot disk into the floppy disk drive of your computer and start your computer.

See “Creating boot disks and boot images” on page 75.

For Windows 98 computers, start your computer in DOS. At the DOS prompt, type:

C:> \progra~1\symantec \Norton~1\ghost.exe

Running Norton Ghost in DOS may require additional DOS drivers to let Norton Ghost access and use some hardware. If you cannot access some hardware, such as a CD-R/RW drive, then create a boot disk that contains the drivers to access the hardware in DOS.

See “Creating boot disks and boot images” on page 75.

Use the Run Ghost Interactively Wizard. See “Starting Ghost.exe” on page 59.

Marking your disks

The first time that you run Ghost.exe on your computer, the License agreement warning dialog box appears. When you click OK, Norton Ghost marks all hard disks to ensure that you do not see this message again.

To mark your disks

In the License agreement warning dialog box, click OK to mark your hard disks.

Navigating without a mouse

If you have mouse drivers loaded, then you can use the mouse to navigate in

Norton Ghost. You can also use the keyboard.

Use arrow keys to navigate the menu.

Press Tab to move from button to button.

Press Enter to activate the selected button.

Press Enter to select an item in a list.

Page 94
Image 94
Symantec 10024709 manual Navigating without a mouse, Marking your disks, See Creating boot disks and boot images on