Symantec 10024709 manual Setting a source for the clone switch, Table A-2, Mode Source Destination

Command-line switches

Clone switch usage

167

Cloning combination options

Table A-2illustrates the possible cloning operations that you can perform.

Table A-2	Cloning operations
Mode		Source		Destination
copy		■	disk	■	disk
restore		■	file	■	disk
Note: The load switch has been		■	tape
			CD-ROM
replaced by the restore switch. The		■
load switch is still fully functional and		■	USB 1.1 and 2.0
is interchangeable with restore.			Mass Storage Device
		■	DVD
create		■	disk	■	file
Note: The dump switch has been				■	tape
					CD writer
replaced by the create switch. The				■
dump switch is still fully functional				■ USB 1.1 and 2.0
and is interchangeable with create.					Mass Storage
					Device
				■	DVD
pcopy		■	disk:partition	■	disk:partition
prestore		■	file:partition	■	disk:partition
Note: The pload switch has been		■	tape:partition
			CD:image:partition
replaced by the prestore switch. The		■
pload switch is still fully functional		■	USB 1.1 and 2.0
and is interchangeable with prestore.			Mass Storage Device
pcreate		■	disk:partition	■	file
Note: The pdump switch has been		■	partition:partition	■	tape
					CD writer
replaced by the pcreate switch. The		You can specify more		■
pdump switch is still fully functional		than one partition.		■	USB 1.1 and 2.0
and is interchangeable with pcreate.					Mass Storage
					Device
				■	DVD

Setting a source for the clone switch

The syntax for this switch is as follows:

SRC={disk file tape cd/dvdwriter }