Symantec 10024709 manual Type Based On Value, Piii ID

160Command-line switches

Command-line switches

	Type	Based On	Value
	M	Manufacturer	Compaq
	P	Product name	Deskpro EN Series SFF
	V	Version	Award Software
	S	Serial number	H925CKH60020
	U	UUID	2DA9379B4707D31185E8C800A4F232BC
	C	M&P combined	Compaq Deskpro EN Series SFF
	I	PIII ID	0000067200028E72A6994A20
-locktype= Type	Lets you lock an image file for use with a specific set of computers defined by the type
	chosen and the source computer.
	For example, ghost -locktype=P creates an image that can be used only on systems that
	have the same product name type as the source computer.
-lpm	The LPT master mode switch causes Norton Ghost to automatically go into LPT master
	mode, and is the equivalent of selecting LPT Master from the main menu.
	See “Peer-to-peer connections” on page 178.
-lps	The LPT slave mode switch causes Norton Ghost to automatically go into LPT slave mode,
	and is the equivalent of selecting LPT Slave from the main menu.
	See “Peer-to-peer connections” on page 178.
-memcheck	Activates internal memory usage checking for Technical Support.
-noauto	Disables the automatic naming of spanned image files during creation. The user is
	prompted for confirmation of the next destination location for the remainder of the image
	file that is being restored.
-noautoskip	Includes the hibernation and skip files in the image file. These files are excluded by
	default.See “Hibernation and swap files” on page 69.
-nofile	Disables the Image File Selection dialog box. Useful when opening directories with large
	numbers of files and slow links.
-noide	Disables access to IDE devices.
-noindex	Prevents Norton Ghost from creating an index when creating an image file. This slightly
	reduces the size of the image file and saves memory but Ghost Explorer is much slower in
	reading the image file. This switch is useful if you are saving an image file from a large disk
	with very little memory.