Symantec 10024709 manual Examples of -CRC32 usage, Table A-7, Parameter Explanation, Table A-8

Command-line switches

-CRC32 switch usage

173

The following parameters can be used with the -CRC32 switch:

Table A-7	Parameters for the -CRC32 switches
Parameter	Explanation
create	Create an ASCII CRC32 file from a disk
verify	Verify a disk from a CRC32 file
pcreate	Create an ASCII CRC32 file from a partition
pverify	Verify a partition from an ASCII CRC32 file
dcreate	Create an ASCII CRC32 file from an image file
dverify	Verify an image file from an ASCII CRC32 file
crcfile	ASCII CRC32 file (default=Ghost.crc)
vlist	Verification list file (default=Ghost.ls)
vexcept	Verification exception file (no default)

Examples of -CRC32 usage

This table provides some examples of how you can use the -CRC32 switch.

Table A-8	-CRC32 usage examples
Switch		Function
ghost.exe -fcr		Creates a CRC32 file (called
		Ghost.crc) while making an image
		file.
ghost.exe -fcr=d:\test.crc		Creates a CRC32 file (called Test.crc)
		while making an image file.
ghost.exe -crc32,		Creates a list of files and CRC32
action=create,src=1,crcfile=ghost.crc		values for a disk.
ghost.exe -crc32,action=dverify,src=		Verifies the list against an image file.
x:dumpfile.gho,crcfile=ghost.crc
ghost.exe -crc32,action=pverify,src=		Verifies a partition in an image file
1:2,crcfile=filename.crc:2		with multiple partitions. This
		example verifies that partition 2 on
		disk 1 is the same as partition 2 in the
		CRC file.