NEC ISDN-PRI Feature Cross Reference, To enter data for Program 15-07 Programmable Function Keys

Program 15 : Extension, Basic Setup

15-07 : Programmable Function Keys

[2] Appearance Function Level (*00 - *99) (Service Code 852)

Function	Function	Additional Data	LED Indication
Number
*00	Not Used
*01	Trunk Key	Trunk Number (001-200)
*02	Trunk Group/Loop Key	Trunk Group Number (001-100)
*05	Loop Keys	• 0=Incoming + Trunk Group
		Number (001-100)
		• 1=Outgoing + Trunk Group
		Number (001-100)
		• 2=Both + Trunk Group
		Number (001-100)

Conditions

When a key is programmed using service code 852, that key cannot be programmed with a function using the 851 code until the key is undefined (000). For example with a Park Key programmed by dialing 852 + *04 must be undefined by dialing 852 + 000 before it can be programmed as a Voice Over key by dialing 851 + 48.

Feature Cross Reference

Refer to chart above.

Telephone Programming Instructions

To enter data for Program 15-07 (Programmable Function Keys):

1.Enter the programming mode.

2.15 07

15-07-01 TEL301 KY01 = *01

back ↑ ↓ select

3.Enter the number of the item you want to program.

15-07-nn TELnnn nnnnn

←→

4.Select the telephone number to be programmed by pressing the FLASH or the VOLUME ▲ or VOLUME ▼ keys.

5.Enter data for the item you selected + HOLD.

6.Enter data for the next item in the program.

OR

Press MSG once to enter a new item number.

OR

Press MSG until you’ve exited that series’s programming section.

74 ◆ Aspire ISDN PRI Manual