NEC ISDN-PRI manual transmit

ISDN Features

Primary Rate Interface (PRI), Placing Calls

Programming (Cont’d)

						Continued￿
						from￿
						previous￿
						page.￿
						Do you want to adjust￿
Adjust the CODEC Gain￿				￿
in 14-01-02 (transmit)￿		Trunks				the gain (volume) for￿
and 14-01-03 (receive).￿						trunks?￿
								￿
							No
				Check the Analog Trunk Timers in 81-01￿
						for compatibility with the telco.￿
					If desired, assign names to trunks in￿
						14-01-01.￿
Stop￿			￿			Do you want to set up￿				￿
	No					an Alternate Trunk￿			Yes
						Route Access Code ?￿
						In 11-09-02, assign the￿
						Service Code set up in the￿
						previous step for Alternate￿
						Trunk Route Access.￿

For example, to make￿ 50 the Alternate Trunk￿ Route Access Code:￿ DIAL = 5￿

Digit = 2￿

Kind = 8￿

In 11-01-01, set up a￿ Service Code for￿ Alternate Trunk Route￿ Access.￿

In 21-15-01, enter the￿				Should extension￿
extension number and￿				be able to use￿
	Yes		￿				No	￿
enter the Trunk Group￿				Alternate Trunk￿
Routing route number.￿				Route Access?￿
Refer to the Trunk￿				Is Trunk Group￿
Group Routing feature￿
	No	￿
and set up Trunk￿				Routing defined?￿
Group Routing.￿
					Yes	￿

In 21-15-01, enter the￿ extension number￿ and enter 0 to￿ prevent routing.￿

Stop￿

28 ◆ Aspire ISDN PRI Manual