NEC ISDN-PRI manual 15-01-04, enter Should Caller ID be included

ISDN Features

Primary Rate Interface (PRI), Placing Calls

Programming (Cont’d)

Continued￿ from￿ previous￿ page.￿

In 15-01-04, enter 0.￿			Should Caller ID be included in￿			In 15-01-04, enter 1.￿
	No	￿		Yes	￿
In 10-03-05 enter 0.￿			the call's setup message?￿			In 10-03-05 enter 1.￿

In 20-09-03, enter 0 to￿				Should telco display the calling￿
disable sub-address￿	No	￿			Yes	￿
				number's sub-address?￿
display by telco.￿
			In 21-12-01, program the calling party number￿
				data (15 digits max.) for each trunk.￿
			In 21-13-01, program the calling party number￿
				data (15 digits max.) for each extension.￿

In 20-09-03, enter 1 to￿ enable sub-address￿ display by telco.￿

In 1005, assign￿ Class of Service to￿ extensions.￿

In 14-01-07, enter 0 to￿			Are outgoing￿
	No	￿	calls allowed on￿	Yes	￿
prevent outgoing calls.￿
			specific trunks?￿

In 14-01-07, enter 1 to￿ allow outgoing calls.￿

In 14-05-01 assign PRI trunks to trunk groups￿

(This determines available channels for PRI￿ trunks).￿

Build an outgoing restriction matrix.￿

In the default program,￿ extensions have full￿ access to all trunks.￿

Do you need to restrict certain￿

extensions from placing calls on￿ Yes￿ certain trunks?￿

No￿

Continued￿ on next￿ page.￿

In 14-07-01 for each￿ Access Map, select￿ the access options￿ for each trunk.￿

In 15-06-01, assign￿ extensions to￿ Access Maps.￿

26 ◆ Aspire ISDN PRI Manual