Pioneer DEH-5200SD Initial Settings, When selecting FM as the source, you cannot switch to SLA

	Section
Operating this unit	02

This unit is equipped with a subwoofer output which can be turned on or off.

1Press M.C. to turn subwoofer output on or off.

2Push M.C. left or right to select the phase of sub- woofer output.

Push M.C. left to select reverse phase and Re- verse appears in the display. Push M.C. right to select normal phase and Normal appears in the display.

Sub W.2 (subwoofer adjustment)

When the subwoofer output is on, you can adjust the cut-off frequency and the output level of the subwoo- fer.

Only frequencies lower than those in the selected range are outputted from the subwoofer.

1Push M.C. left or right to select cut-off frequency. 50Hz—63Hz—80Hz—100Hz—125Hz

2Push M.C. up or down to adjust the output level of the subwoofer.

Each time M.C. is pushed up or down, subwoofer level increases or decreases. +6 to -24 is dis- played as the level is increased or decreased.

Bass (bass boost)

1Push M.C. up or down to select a desired level.

0 to +6 is displayed as the level is increased or de- creased.

HPF (high pass filter adjustment)

When you do not want low sounds from the subwoo- fer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are output from the front or rear speakers.

1Press M.C. to turn high pass filter on or off.

2Push M.C. left or right to select cut-off frequency. 50Hz—63Hz—80Hz—100Hz—125Hz

SLA (source level adjustment)

SLA (Source level adjustment) lets you adjust the vo- lume level of each source to prevent radical changes in volume when switching between sources.

!Settings are based on the FM volume level, which remains unchanged.

Before adjusting source levels, compare the FM volume level with the level of the source you wish to adjust.

!The MW/LW volume level can also be adjusted with source level adjustments.

1Push M.C. up or down to adjust the source vo- lume.

Adjustment range: +4 to –4

Note

When selecting FM as the source, you cannot switch to SLA.

Initial Settings

1

1Function display

! Shows the function status.

1Press SRC/OFF and hold until the unit turns off.

2Press M.C. and hold until the initial set- ting menu appears in the display.

3Turn M.C. to select the initial setting. After selecting, perform the following proce- dures to set the initial setting.

Language select (multi language)

For your convenience, this unit equips multiple lan- guage display. You can select the language best sui- ted to your first language.

1Press M.C. to select the language.

English—Français—Italiano—Español— Deutsch—Nederlands—РУССКИЙ

Calendar (setting the date)

1Push M.C. left or right to select the segment of the calendar display you wish to set. Year—Day—Month

2Push M.C. up or down to set the date.

Clock (setting the clock)

Operating this unit

En 15