Pioneer DEH-5200SD Operating this unit, Using PI Seek, Using Auto PI Seek for preset stations

	Section
Operating this unit	02

1 2 3 5

b

Non-RDS or MW/LW

1Band indicator

25 (stereo) indicator

3LOC indicator

Appears when local seek tuning is on.

4Preset number indicator

5Signal level indicator

6TEXT indicator

Shows when the radio text is received.

7PTY label indicator

8Program service name

9News () indicator

Appears when the set news program is re- ceived.

aTP () indicator

Appears when a TP station is tuned in.

bFrequency indicator

Selecting a band

1Press BAND/ESC until the desired band (FM-1, FM-2, FM-3 for FM or MW/LW) is displayed.

Manual tuning (step by step)

1Push M.C. left or right.

Seeking

1Push and hold M.C. left or right.

You can cancel seek tuning by pushing M.C. left or right.

While pushing and holding M.C. left or right, you can skip stations. Seek tuning starts as soon as you release M.C.

Using PI Seek

If the tuner cannot find a suitable station, or reception status deteriorates, the unit automa- tically searches for a different station with the same programming. During the search,

PI seek is displayed and sound is muted.

Using Auto PI Seek for preset stations

When preset stations cannot be recalled, the unit can be set to perform PI Seek during pre- set recall.

!The default setting for Auto PI Seek is off. Refer to Auto PI (auto PI seek) on page 16.

Storing and recalling stations

You can easily store up to six stations for each band as presets.

1 Press (list).

Preset screen is displayed.

2Use M.C. to store the selected fre- quency in memory.

Turn to change the preset number. Press and hold to store.

3Use M.C. to select the desired station.

Turn to change the station. Press to select.

# All stations stored for FM bands can be re-

called from each independent FM band.

# You can also change the station by pushing

M.C. up or down.

# To return to the ordinary display, press BAND/ ESC or (list).

Operating this unit

En 7