![](/images/new-backgrounds/1242810/2428107x1.webp)
Section
01
Before You Start
Reverse mode | About this manual |
If you do not perform an operation within about 30 seconds, screen indications start to reverse, and then continue reversing every 10 seconds. Pressing button BAND/ESC when power to this unit is turned off while the igni- tion switch is set to ACC or ON cancels the re- verse mode. Press button BAND/ESC again to start the reverse mode.
In the following instructions, USB memories, USB portable audio players, and SD memory cards are collectively referred to as “external storage devices (USB, SD).” If only USB mem- ories and USB portable audio players are indi- cated, they are collectively referred to as “USB storage devices.”
Resetting the microprocessor
The microprocessor must be reset under the following conditions:
!Prior to using this unit for the first time after installation
!If the unit fails to operate properly
!When strange or incorrect messages ap- pear on the display
RESET button
1Remove the front panel.
2Press RESET with a pen tip or other pointed instrument.
Sound muting
Sound is muted automatically when:
!A call is made or received using a cell phone connected to this unit.
!Voice guidance is output from a connected
Pioneer navigation unit.
The sound is turned off, MUTE is displayed and no audio adjustments, except volume con- trol, are possible. Operation returns to normal when the phone connection or the voice gui- dance is ended.
4 | En |