Symantec 10024709 manual Clone switch usage, Defining the type of clone command, Table A-1

166Command-line switches

Clone switch usage

Clone switch usage

The syntax for the clone switch is:

-clone,MODE={operation},SRC={source},DST={destination}, [SZE{size},SZE{size}.......]

Defining the type of clone command

MODE defines the type of clone command. The syntax is as follows:

MODE={copy restore create pcopy prestore pcreate}

Table A-1	Mode commands
Switch		Action
copy		Disk-to-disk copy
restore		File-to-disk restore
Note: The load switch has been replaced by the
restore switch. The load switch is still fully
functional and is interchangeable with restore.
create		Disk-to-file backup
Note: The dump switch has been replaced by
the create switch. The dump switch is still fully
functional and is interchangeable with create.
pcopy		Partition-to-partition copy
prestore		File-to-partition restore
Note: The pload switch has been replaced by
the prestore switch. The pload switch is still fully
functional and is interchangeable with prestore.
pcreate		Partition-to-file backup. This allows
Note: The pdump switch has been replaced by		multipartition Ghost backup selection
		for file.
the pcreate switch. The pdump switch is still
fully functional and is interchangeable with
pcreate.