48

Setting options and defaults

Setting Norton Ghost options and defaults

To set the options for a mapped network drive

1While running a Windows wizard task, in the Advanced Settings window, click Advanced Settings.

2Click Map network drive.

3Do one of the following:

Select a network card from the drop-down list.

Norton Ghost displays any installed drivers that it detects. Select the network driver for the particular make and model of the network card that is installed on the computer.

See “Selecting a template” on page 84.

Click Browse to open the Ghost Boot Wizard and select a network card. From the Ghost Boot Wizard, you can add a network card. If your network card is not on the list, you can modify a network card template. See “Selecting a template” on page 84 and “Adding network drivers to the Ghost Boot Wizard” on page 86.

4Select one of the following:

Use DHCP: Use this option if your network contains a DHCP server.

Static IP Address: Complete the fields below this option if your network does not contain a DHCP server.

5In the Network resource field, type a network resource.

6In the User name field, type a user name.

7In the Domain field, type a domain name.

8Click OK.

Setting display options

You can set some default display options.

To set display options

1In the Ghost Basic window, click Options.

2Click Display.

3Check Show Norton Ghost tray icon on start up to display the Norton Ghost icon in the taskbar.

4Check Show disaster recovery warning before running a Norton Ghost task to display the Disaster Recovery dialog box before running a task.

Page 48
Image 48
Symantec 10024709 Setting display options, Click Map network drive, See Selecting a template on, To set display options