Intermec 751G user manual Reboot Functions, NLEDGetDeviceInfo, NLEDSetDevice, #include nled.h

Chapter 3 — Configuring the Computer

NLEDGetDeviceInfo

Usage

#include “nled.h”

Syntax

BOOL NLEDGetDeviceInfo ( UINT nInfoId, void *pOutput );

Parameters

nInfoId	Integer specifying the information to return. These values are defined:
	NLED_COUNT_INFO	pOutput buffer specifies the number of LEDs on the device.
	NLED_SUPPORTS_INFO_ID	pOutput buffer specifies information about the capabilities supported
		by the LED.
	NLED_SETTINGS_INFO_ID	pOutput buffer has information about LED current settings.
pOutput	Pointer to the buffer to which the information is returned. The buffer points to various structure types
	defined in “nled.h”, depending on the value of nId, as detailed in the following table:
	Value of nID	Structure in pOutput
	LED_COUNT_INFO	NLED_COUNT_INFO
	NLED_SUPPORTS_INFO	NLED_SUPPORTS_INFO
	NLED_SETTINGS_INFO	NLED_SETTINGS_INFO

NLEDSetDevice

Usage

#include “nled.h”

Syntax

BOOL NLEDSetDevice ( UINT nDeviceId, void *pInput );

Parameters

nDeviceId	Integer specifying the device identification. The following is defined:
	NLED_SETTINGS_INFO_ID	Contains information about the desired LED settings.
pInput	Pointer to the buffer that contains the NLED_SETTINGS_INFO structure.

Reboot Functions

There are several methods, via Kernel I/O Control functions, that an application program can use to force the 751G to reboot.

You can also see the Device Resource Kit in the IDL for information about these functions. The IDL is available as a download from the Intermec web site at www.intermec.com/idl. Contact your Intermec representative for information.

•IOCTL_HAL_REBOOT

This performs a warm-boot (page 76). See note on the next page.

98 751G Color Mobile Computer User’s Manual