Chapter 5 — Network Support
122 751G Color Mobile Computer User’s Manual
1Make sure you have configured the communications and radio
parameters on your 751G and that Funk is your security choice.
2Open Intermec Settings. Tap (+) to expand Communications > 802.11
Radio > Funk Security > Profile X with “X” being “1” through “4.”
3For Association, select “WPA” and press Enter.
4For 8021x, select “PEAP,” “TLS,” “TTLS,” “LEAP,” or “EAP-FAST”
and press Enter.
If you select “TTLS” or “PEAP:”
aSelect User Name, type your user name, then press Enter.
bSelect User Password, type a user password, then press Enter.
cFor Validate Server Certificate, select “Yes,” then press Enter. Note
that you must have the date on the 751G set correctly when you enable
Validate Server Certificate.
dYou must enter a User Name and Subject Name. You can also enter a
Server 1 Common name or Server 2 Common name if you want to
increase your level of security.
If you select “TLS:”
aLoad a user and root certificate on your 751G. For help, see “Loading
Certificates” on page 118.
bFor Validate Server Certificate, select “Yes,” then press Enter. Note
that you must have the date on the 751G set correctly when you enable
Validate Server Certificate.
cYou must enter a User Name and Subject Name. You can also enter a
Server 1 Common name or Server 2 Common name if you want to
increase your level of security.
If you select “LEAP” or “EAP-FAST:”
aSelect User Name, type your user name, then press Enter.
bSelect User Password, type a user password, then press Enter.