Intermec 751G user manual Uint GetTXPower Ulong, Uint GetWepStatus Ulong

Chapter 3 — Configuring the Computer

GetTXPower()

Call this function to get the current transmit power of the radio.

Syntax	UINT GetTXPower( ULONG & );
Parameters	NDIS_POWER_LEVEL_63	63 mW
	NDIS_POWER_LEVEL_30	30 mW
	NDIS_POWER_LEVEL_15	15 mW
	NDIS_POWER_LEVEL_5	5 mW
	NDIS_POWER_LEVEL_1	1 mW
	NDIS_POWER_LEVEL_UNKNOWN	Unknown Value or Error.
Return Values	ERROR_SUCCESS when successful, ERR_QUERY_FAILED when the query failed, or
	ERR_CONNECT_FAILED if a connection with the radio failed.
Remarks	If ERROR_SUCCESS is returned, your ULONG reference is populated with the TX power in
	milliwatts (mW). Valid ranges are from 5 mW to 100 mW.
Definitions	#ifdef DYNAMIC_LOADING

typedef UINT (*PFN_GetTXPower)(ULONG &); #else

UINT GetTXPower(ULONG &); #endif

GetWepStatus()

Call this to get the current state of the radio’s WEP and encryption levels.

Syntax	UINT GetWepStatus( ULONG & );
Parameters	NDIS_ENCRYPTION_1_ENABLED	WEP is enabled; TKIP and AES are not enabled, and a
		transmit key may or may not be available. (same as
		NDIS_RADIO_WEP_ENABLED)
	NDIS_ENCRYPTION_DISABLED	Indicates AES, TKIP, WEP are disabled, transmit key
		available. (Same as NDIS_RADIO_WEP_DISABLED)
	NDIS_ENCRYPTION_NOT_SUPPORTED	Indicates WEP, TKIP, AES not supported. (Same as
		NDIS_RADIO_WEP_NOT_SUPPORTED)
	NDIS_ENCRYPTION_1_KEY_ABSENT	Indicates AES, TKIP, WEP disabled, transmit key not
		available. (Same as NDIS_RADIO_WEP_ABSENT)
	NDIS_ENCRYPTION_2_ENABLED	Indicates that TKIP and WEP are enabled; AES is not
		enabled, and a transmit key is available.
	NDIS_ENCRYPTION_2_KEY_ABSENT	Indicates no transmit keys available for use by TKIP or
		WEP, TKIP, WEP enabled; AES is not enabled.
	NDIS_ENCRYPTION_3_ENABLED	Indicates that AES, TKIP, and WEP are enabled, and a
		transmit key is available.
	NDIS_ENCRYPTION_3_KEY_ABSENT	Indicates no transmit keys available for use by AES,
		TKIP, WEP; and AES, TKIP, WEP enabled.

Return Values ERROR_SUCCESS when successful, ERR_QUERY_FAILED when the query failed, or ERR_CONNECT_FAILED if a connection with the radio failed.

Remarks	If ERROR_SUCCESS is returned, your ULONG reference is populated with one of the parameters
	listed above.
Definitions	#ifdef DYNAMIC_LOADING
	typedef UINT (*PFN_GetWepStatus)(ULONG &);
	#else
	UINT GetWepStatus(ULONG &);
	#endif

751G Color Mobile Computer User’s Manual 85