Intermec 751G Wireless Network Support, Accessing Files Stored on the Secure Digital Card

Chapter 1 — Using the Computer

2Align the folded edge of the pull tab where there is no adhesive with the bottom end of the storage card. Peel away the rest of the paper from the long end, then firmly press down the remaining adhesive area of the tab onto the storage card.

Align the folded end with this edge of the storage card

3Insert the storage card, with the contacts facing the keypad, into your 751G to ensure that no adhesive is exposed once the tab is placed.

Keypad facing down

4Press on the storage card until you hear a click. If needed, close the storage media access door.

Accessing Files Stored on the Secure Digital Card

When inserted in the 751G, the Secure Digital card inserted in your 751G, it appears as the “\SDMMC Disk” folder. To access this folder, select My Computer, then tap the “\SDMMC Disk” folder.

Removing the Secure Digital Card

1Press the Power key for seconds, and then release the Power key to turn off the 751G. Remove the storage media access door.

2Gently depress the Secure Digital card to release the card, then pull the card from its slot.

3Replace the storage media access door.

4Press the Power key for two to three seconds, and then release the Power key to turn on the 751G.

Wireless Network Support

Radios are installed at the factory and cannot be installed by a user. The 751G must be serviced to install or replace radios. Contact your Intermec representative for more information. See Chapter 5, “Network Support” for information about supported radios.

Note: Changes or modifications not expressly approved by Intermec could void the user’s authority to operate the equipment.

751G Color Mobile Computer User’s Manual 17