Intermec SmartSystems: Configuring the 751G Mobile Computer Manual

Chapter 3 — Configuring the Computer

5Add the AuotRun.exe file to the “\SDMMC Disk\2577” folder.

6Remove the Secure Digital storage card from your PC and reinstall it into the 751G, then warm-boot the 751G to add these files to the Secure Digital storage card.

If the AutoUser.dat file is found and the “RUN=” statement is correct, the task manager launches and executes your program on startup.

Using the SmartSystems Console

You can use the SmartSystems Console to drag-and-drop Intermec applications onto your 751Gs. The 751G ships with the SmartSystems client loaded on it. The console is part of SmartSystems Foundation and is available from the Intermec web site.

1Download the file from the Intermec web site, unzip it on your desktop.

2From the SmartSystems Console, drag-and-drop the application onto each 751G discovered in your network.

To download SmartSystems Foundation, go to www.intermec.com/idl and open the Device Management page. For information on using the SmartSystems Console, see its online help.

Using Wavelink Avalanche

You can use the Wavelink Avalanche device management system to install applications on all of your wireless 751Gs.

The wireless 751G ships with the Avalanche Enabler already loaded on it. The Avalanche Enabler is configured to activate automatically (typically on a clean-boot).

Note: If you manually activate the Avalanche Enabler on the 751G, you may be prompted for a password when you exit the Avalanche Enabler. The default password is leave.

When the Avalanche Enabler is activated, the 751G attempts to connect to the Avalanche Agent. When the 751G connects to the Agent, the Agent determines whether an update is available and immediately starts the software upgrade, file transfer, or configuration update.

1Use the Avalanche Management Console to install software packages and updates. For help, see its online help, contact an Intermec representative, or visit the Wavelink web site at www.wavelink.com.

2Schedule the 751G updates or manually initiate an update using the Avalanche Management Console.

751G Color Mobile Computer User’s Manual

45

Image 59

Intermec 751G user manual Using the SmartSystems Console, Using Wavelink Avalanche

Contents

751G Color Mobile Computer Intermec Technologies Corporation Worldwide Headquarters Revision Letter Date Description of Change Document Change Record 751G Color Mobile Computer User’s Manual Contents Software Builds Where to Find Information Customization and Lockdown Viii Contents 129 Before You Begin Safety InformationGlobal Services and Support Warranty Information Telephone Support Service Description Choose this optionWho Should Read This Document? Related Documents To download documents Patent Information Before You Begin Xiv 1Using the Computer Ambient Light Sensor Microphone Audio SystemSpeaker External Headset Jack Battery Insert your 751G into its single dock for charging Installing and Charging the Battery To remove the battery Removing the Battery Enabling the Registry Storage Maximizing Battery LifeBeeper Intermec representative for information Adjusting the Beeper VolumeTo enable the beeper Enabling the Beeper Disabling the Beeper Intermec Settings AppletTo disable the beeper Settings icon to access the applet Orange Plane Keys KeypadBacklight for Keypad Key Sequences To Enter Press the Keys Alpha Green Plane Keys LED Color/Action Description LEDsLED Color and Action Description Scanning with the Area Imager Resetting Your ComputerScanning Bar Codes To use the area imager Software Build VersionImproving the Performance of the Area Imager SmartSystems Platform Bundles Sspb Software ToolsStorage Media Attaching a Tab to the Secure Digital Card Accessing the Secure Digital Card SlotInternal Card Slots and Connector Removing the Secure Digital Card Wireless Network SupportAccessing Files Stored on the Secure Digital Card Physical and Environmental Specifications Accessories Memory and Storage Physical DimensionsPower Keypad Option Using the Computer 2Windows CE .NET For information on See this source Where to Find InformationSoftware Builds Basic Skills Start Menu and Task Bar Desktop ScreenPrograms Typing With the Onscreen Keyboard NotificationsEntering Information Selecting Typed Text Using Transcriber To start Task Manager Finding and Organizing InformationTo open Windows Explorer Adding or Removing Programs Adjusting SettingsCustomizing Your Computer Adding Programs Using Microsoft ActiveSync Adding a Program to the Start Menu Using Windows Explorer on the ComputerUsing Microsoft ActiveSync on the PC Adding a Program Directly from the Internet Microsoft WordPad Microsoft ActiveSync Creating a Document Typing Mode Synchronizing WordPad Documents Writing Mode Browsing the Internet Internet ExplorerViewing Mobile Favorites and Channels Tap to bring down a list of addresses 3Configuring the Computer Synchronizing the Computer System Time with a Time Server Configuring ParametersConfiguring the Computer With Intermec Settings Example Configuring the Computer through the NetworkWhere Configuring the Computer in a UDP Plus Network Directly to a Generic Serial Port Configuring the PrinterUsing Configuration Parameters Directly to a Port MSI Configuring the ScannerData Collection Configuration Scanner Control and Data Transfer Select this option If you are scanning Changing Comm Settings UPC Symbology Density Near Distance Far DistanceSymbology Density Minimum Distance Reading Distances Using Microsoft ActiveSync Installing Applications on the Computer To use Microsoft ActiveSync Using a Storage Card Using Wavelink Avalanche Using the SmartSystems Console Developing Applications for the Computer Installing Cabinet Files Launching Your Application Automatically Packaging Applications for the Computer RunAutoRun Examples of keyword usage are as follows AutoExecUsage Chain AutoRunAutoCopy AutoReg AutoCab Version Creating Cab FilesCreating Device-Specific Cab Files Creating an .inf File Strings CEStringsStrings CEDevice CEDevice.SH3 CEDevice SourceDiskFiles DefaultInstallSourceDiskNames DestinationDirs DestinationDirsSourceDisksFiles.SH3 SourceDisksFiles.MIPS AddReg DefaultInstall.SH3DefaultInstall.MIPS CopyFiles Shortcuts.All RegSettings.AllCEShortCuts Sample .INF File DestinationDirsRequired section CEDevice ProcessorType =SourceDisksFiles Required section Configuring the Computer After the CAB File Extraction Using Installation Functions in Setup.dllShows the functions that are exported by Setup.dll Point to Setup.dll Configuring the Computer Configuring the Computer Destdirectory Creating Cab Files with CAB Wizard Customization and Lockdown Troubleshooting the CAB Wizard Return Values Kernel I/O ControlsSyntax Parameters ID Field Values UsageID Field Values #include oemioctl.h Itcnvparmedbgsubnet ITCNVPARM80211INSTALLED Describes and enables the registry save location #include pkfuncs.h #include deviceid.h Id field of lpInBuf may be one of the following values Returns the HAL version information of the Pocket PC image Ioctlhalgetoalverinfo Returns the HAL version information of the OS image Ioctlhalgetbootloaderverinfo None Ioctlhalcoldboot Sample Ioctlhalgetbootdevice #include pkfuncs.h Returns processor information Returns Xscale processor ID Ioctlgetcpuid RadioConnect Networking APIsBasic Connect/Disconnect Functions GetAssociationStatus Query Information FunctionsRadioDisconnect RadioDisassociate GetBSSID GetAuthenticationModeUint GetAuthenticationMode Ulong Uint GetLinkSpeed int GetDiversityGetLinkSpeed Uint GetDiversity Ushort Uint GetNetworkMode Ulong Call this function to get the current Network Mode Ssid forGetMac 802.11b/g radio Uint GetNetworkType Ulong GetNetworkTypeGetSSID GetRSSI GetPowerModeUint GetPowerMode Ulong Uint GetWepStatus Ulong GetTXPowerUint GetTXPower Ulong GetWepStatus Uint GetCCXStatus Ulong GetRadioIpAddressGetCCXStatus Uint GetRadioIpAddress Tchar Set Information Functions EnableWepEnables or disables WEP encryption on the radio TRUE/FALSE Uint EnableWep Bool Call this function to set the desired encryption status Uint EncryptionStatus Uint modeEncryptionStatus RemoveWep SetChannel SetAuthenticationModeCall this function to set the desired authentication mode Uint SetAuthenticationMode Ulong SetNetworkMode SetPowerModeCall this function to set the desired Network Mode Call this function to set the desired power mode Uint SetCCXStatus Ulong Call this function to set the desired mixed cell modeSetCCXStatus SetMixedCellMode Uint EnableSuppLogging Ulong ConfigureProfileEnableSuppLogging Uint ConfigureProfile Tchar GetCurrentDriverName EnableZeroConfigIsDHCPEnabled IsSupplicantRunning IsZeroConfigEnabledIsOrinoco StartScanList ResetRadioToSystemSaveRenewDHCP StopSupplicant SwitchPacketDriverCall this function to stop the supplicant service StartSupplicant Function Syntax NotificationsDeprecated Functions NLEDSetDevice Reboot FunctionsThis performs a warm-boot page 76. See note on the next NLEDGetDeviceInfo Key Values Performs a system warm-boot, preserving the object storeReprogramming the 751G Keypad Alpha plane mapping is in the registry at How Key Values Are Stored in RegistryChange Notification Orange plane mapping is in the registry at Press this Key Meaning ScanCode Advanced Keypad RemappingScan Codes Sample View of Registry Keys 4Maintaining the Computer Updating the System Software Using a Storage Card to Upgrade the Computer Button, or you may damage the Reset button Using the SmartSystems Console to Upgrade the Computer Problem Solution Troubleshooting Your Computer Problems While Configuring the Computer 751G, authentication server Problems While Configuring 802.1x Security Cleaning the Scanner Maintaining the Computer 110 5Network Support 802.11b/g Communications To configure the radioConfigure your radio settings, then tap File Save Connecting to an Internet Service Provider Remote Access Modems 114 751G Color Mobile Computer User’s Manual 115 Connecting to Work Enter the Host name or IP address field Ending a Connection Loading Certificates Configuring SecurityWireless Networks EAP-PEAP EAP-FASTLeap EAP-TTLS Configuring Funk SecurityChoosing Between Microsoft and Funk Security EAP-TLS Use this procedure to set WPA security with Funk security Using WPA SecurityConfiguring WPA Security With Funk Security If you select Leap or EAP-FAST If you select Ttls or PeapIf you select TLS Configuring WPA-PSK Security With Funk Security Using 802.1x Authentication Load a user and root certificate on your 751G Configuring 802.1x Security With Funk Security Configuring Static WEP Security With Funk Security Using Static WEP Security Configuring Microsoft Security SmartSystems Foundation Network Support 128 Index Numerics Symbols Vnclassasic VNCLASSBOOTSTRAP, 69 Vnclasskbd HAL Ioctlgetcpuid IOCTLHALCOLDBOOT, 74, 99 Ioctlhalgetbootdevice IOCTLGETCPUID, 77 IOCTLHALCOLDBOOT, 74 Ioctlhalgetbootdevice NDISENCRYPTION3KEYABSENT Ndisradioscanning PKFUNCS.H Ioctlhalgetdeviceid System time, 36 SYSTEMINFO.dwProcessorType Ioctlgetcpuid Index 140 Page 961-054-036C