Intermec 751G user manual Software Build Version, Improving the Performance of the Area Imager

Chapter 1 — Using the Computer

To use the area imager

1Press the power switch to turn on the 751G, point the scanner window a few inches from the bar code label, and hold steady.

2Press either Scan button and center the red aiming beam over the bar code label. The aiming beam is smaller when the imager is closer to the bar code and larger when it is further away.

3When a bar code label is successfully read and a high beep is emitted, release the Scan button you pressed.

Scan button on right

Scan or record button on left

Improving the Performance of the Area Imager

If you have problems scanning a bar code with the 2D imager, go to “Improving the Performance of the Area Imager” on page 41 for tips on improving its performance.

Software Build Version

The Persistent Storage Manager (PSM) is an area of storage which is embedded in a section of the system’s FLASH memory. This storage area is not erased during a cold-boot. It may, however, be erased during the reflashing process. In addition to storing applications and data files, you do have the option to store a persistent registry to the PSM region.

To check to see if your 751G has the latest PSM build or the latest CE build, double-tap the Internet Explorer icon from the desktop, then scroll down for the latest information displayed beneath the 751G Version Information title.

14 751G Color Mobile Computer User’s Manual