Intermec 751G user manual RenewDHCP, ResetRadioToSystemSave, StartScanList

Chapter 3 — Configuring the Computer

RenewDHCP()

Call this to force a DHCP renewal on the current network adapter.

Syntax UINT RenewDHCP( );

Parameters None.

Return Values ERROR_SUCCESS when successful.

Remarks	You should not have to call this function on Microsoft Windows CE 4.2
	.NET and later devices.
Definitions	#ifdef DYNAMIC_LOADING
	typedef UINT (*PFN_RenewDHCP)();
	#else
	UINT RenewDHCP();
	#endif

ResetRadioToSystemSave()

Call this function to force the radio to reset to the last desired active profile.

Syntax UINT ResetRadioToSystemSave( );

Parameters None.

Return Values ERROR_SUCCESS when successful.

Remarks None.

Definitions #ifdef DYNAMIC_LOADING

typedef UINT (*PFN_ResetRadioToSystemSave)(); #else

UINT ResetRadioToSystemSave(); #endif

StartScanList()

If a scan list is configured on the system, this causes the API to begin the process of scanning for an available network. This call can take quite a while to process (depending upon the length of the scan list and how long it takes to find a valid network), you may wish to call it from a separate thread.

Syntax UINT StartScanList( );

Parameters None.

Return Values ERROR_SUCCESS when successful.

Remarks	Call this function to start the scan list functionality of the system.
Definitions	#ifdef DYNAMIC_LOADING
	typedef UINT (*PFN_StartScanList)();
	#else
	UINT StartScanList();
	#endif

751G Color Mobile Computer User’s Manual 95