Chapter 1 — Using the Computer

Enabling the Beeper

To enable the beeper:

1Tap Start > Settings > Control Panel. Double-tap the Volume & Sounds icon, then tap the Volume tab.

2Drag the slider bar to the right, away from the “Soft” position.

3Tap OK to exit this applet.

Adjusting the Beeper Volume

To select a beeper volume for the 751G, tap Start > Intermec Settings, then tap the Device Settings option. Tap (+) to expand the Beeper option, then tap (+) to expand the Volume option. Select an item, then tap (+) to close this option.

Note: Information about the Intermec Settings applet is found in the

Intermec Computer Command Reference Manual (P/N 073529). See your

Intermec representative for information.

8

751G Color Mobile Computer User’s Manual

Page 22
Image 22
Intermec 751G user manual Enabling the Beeper, Adjusting the Beeper Volume, To enable the beeper