Chapter 3 — Configuring the Computer
The computer returns the CgS+BV4 transaction to the host application:
Cg | is a TMF Configuration Get response. |
$+ is the Change Configuration reader command.
BV4 means the Beeper Volume configuration command is set to a value of 4, which is a very high beeper volume.
Configuring the Computer in a UDP Plus Network
Use the host computer to configure a 751G in your wireless network. To send and receive configuration data or files, write a host application that can communicate with an Intermec Application Server (IAS) (formerly Gateway or DCS 30X).
For help, see the appropriate Gateway or DCS 30X User’s Manual. Use the Terminal Message Format (TMF) protocol to send and receive transactions between the host application and the 751G.
To set up the IAS, configure a
All configuration responses are routed with the $NGCFGRSP transaction ID. The IAS cannot track multiple applications sending reader or configuration commands. If you have two host applications sending reader or configuration commands, they must both be configured to receive the $NGCFGRSP transactions, and receive all 751G responses.
To set up the host computer, verify host
To set up the application, prepare and write a host application that can communicate with the IAS and send transactions to and receive transactions from the 751G in this format.
transaction header | TMF field | commands |
where:
transaction is a
header destinations application ID, transaction ID, and other. Set the system message (SYS$MSG) flag to E in the transaction header.
TMF field is a
CG | Configuration Get request sent from the host application. |
Cg | Configuration Get response sent from the 751G to host computer. |
CS | Configuration Set request sent from the host application. |
Cs | Configuration Set response sent from the 751G to the host computer |
commands are the reader and configuration commands to set on the 751G or the current value to retrieve from the 751G. To save configuration changes in flash memory, send the .+1 reader command as the last command. See the Intermec Computer Command Reference Manual for supported commands.
38 | 751G Color Mobile Computer User’s Manual |