Intermec 751G SetNetworkMode, SetPowerMode, Call this function to set the desired Network Mode

Chapter 3 — Configuring the Computer

SetNetworkMode()

Call this function to set the desired Network Mode.

Syntax	UINT SetNetworkMode( ULONG );
Parameters	NDIS_NET_MODE_IBSS	802.11b/g Ad–Hoc Mode.
	NDIS_NET_MODE_ESS	802.11b/g Infrastructure Mode.
	NDIS_NET_MODE_UNKNOWN	Anything Else/Unknown Error
	NDIS_NET_AUTO_UNKNOWN	Automatic Selection.Using this is not supported or recommended
	NDIS_NET_TYPE_OFDM_5G	5 Gigahertz 54 Mbps
	NDIS_NET_TYPE_OFDM_2_4G	802.11b/g 2.4 Gigahertz
Return Values	ERROR_SUCCESS when successful, ERR_QUERY_FAILED when the query failed, or
	ERR_CONNECT_FAILED if a connection with the radio failed.
Remarks	None.
Definitions	#ifdef DYNAMIC_LOADING
	typedef UINT (*PFN_SetNetworkMode)(ULONG);
	#else
	UINT SetNetworkMode(ULONG);
	#endif

SetPowerMode()

Call this function to set the desired power mode.

Syntax	UINT SetPowerMode( ULONG mode );
Parameters	NDIS_RADIO_POWER_MODE_CAM	Continuous Access Mode (ie: always on).
	NDIS_RADIO_POWER_MODE_PSP	Power Saving Mode.
	NDIS_RADIO_POWER_UNKNOWN	Unknown power mode.
	NDIS_RADIO_POWER_AUTO	Auto.
	NDIS_RADIO_POWER_MODE_FAST_PSP Fast PSP, good savings, fast
Return Values	ERROR_SUCCESS when successful, ERR_QUERY_FAILED when the query failed, or
	ERR_CONNECT_FAILED if a connection with the radio failed.
Remarks	None.
Definitions	#ifdef DYNAMIC_LOADING

typedef UINT (*PFN_SetPowerMode)(ULONG mode); #else

UINT SetPowerMode(ULONG mode); #endif

90 751G Color Mobile Computer User’s Manual