Chapter 3 — Configuring the Computer
;Perform a SetEvent on the event name "autoexec_started". SIGNAL "autoexec_started"
;Include this child data file, childexec.dat.
CALL "\childexec.dat"
;Use autocopy to copy the audio control panel from flash file store to the windows directory. Wait for up to 60 seconds for it to exit.
EXEC "\Flash File Store\SYSTEM\autocopy.exe"
;Change the default EXEC wait time to 90 seconds.
EXECWAIT 90
;Suspend processing any commands for 10 seconds. WAIT 10
;Suspend processing any commands until event called MyEventName is signaled. WAITFOR "MyEventName"
AutoRun
AutoRun (AutoRun.exe) automates operations such as launching other processes and is configured through the AutoRun data file (AutoRun.dat). This file must be in the same directory as the program itself.
AutoRun supports the following script commands in AutoUser.dat and
AutoRun.dat.
Note: If you need to add steps at boot time, add them to AutoUser.dat, not to AutoRun.dat. AutoRun.dat is provided by Intermec and is subject to change. AutoUser.dat is the designated place for the end user to add steps to the boot time process.
EXEC | Launches a specified program, waits for it to complete (up to 10 minutes). |
|
|
CALL | Processes a specified file of commands and returns. |
CHAIN | Processes a specified file of commands and does not return. |
|
|
RUN | Loads a specified program and executes it. |
LOAD | Loads a specified program and executes it. |
|
|
AutoRun handles quoted file names for the first parameter to allow specifying path names or file names that contain white space. Note only one set of quotes per command is supported. AutoRun.dat entry examples:
RUN | “Flash File Store\Apps\some.exe” arg1, arg2, arg3 |
|
|
CALL | “Flash File Store\2577\usercmds.dat” |
|
|
AutoCopy
AutoCopy (AutoCopy.exe) copies/moves files between locations. It has no user interface and is configured through command line arguments. It has support for the following parameters, in no particular order:
50 | 751G Color Mobile Computer User’s Manual |