Intermec 751G user manual Uint SetAuthenticationMode Ulong, Uint SetChannel Ushort

		Chapter 3 — Configuring the Computer
	SetAuthenticationMode()
	Call this function to set the desired authentication mode.
Syntax	UINT SetAuthenticationMode( ULONG );
Parameters	NDIS_RADIO_AUTH_MODE_OPEN	802.11b/g Open Authentication. Indicates that the
		radio is using an open system.
	NDIS_RADIO_AUTH_MODE_SHARED	802.11b/g Shared Authentication. Indicates that the
		radio is using a shared key.
	NDIS_RADIO_AUTH_MODE_AUTO	Auto switch between Open/Shared. Indicates
		automatic detection is used when available.
	NDIS_RADIO_AUTH_MODE_ERROR	Defined as error value. Indicates the authentication
		mode was not determined at this time or is
		unknown.
	NDIS_RADIO_AUTH_MODE_WPA	WPA Authentication
	NDIS_RADIO_AUTH_MODE_WPA_PSK	WPA Preshared Key Authentication
	NDIS_RADIO_AUTH_MODE_WPA_NONE	WPA None

Return Values ERROR_SUCCESS when successful, ERR_QUERY_FAILED when the query failed, or ERR_CONNECT_FAILED if a connection with the radio failed.

Remarks None.

Definitions #ifdef DYNAMIC_LOADING

typedef UINT (*PFN_SetAuthenticationMode)(ULONG); #else

UINT SetAuthenticationMode(ULONG); #endif

SetChannel()

This function is currently not implemented. Ad-hoc networks automatically select a channel or use the already existing channel.

Syntax	UINT SetChannel( USHORT );
Parameters	USHORT value that should populate with the desired channel (1-14).
Return Values	None.
Remarks	None.
Definitions	#ifdef DYNAMIC_LOADING
	typedef UINT (*PFN_SetChannel)(USHORT);
	#else
	UINT SetChannel(USHORT);
	#endif

751G Color Mobile Computer User’s Manual 89