Intermec 751G user manual StartSupplicant, StopSupplicant, SwitchPacketDriver

Chapter 3 — Configuring the Computer

StartSupplicant()

Call this to start the supplicant service if it is installed on the system.

Syntax	UINT StartSupplicant( );
Parameters	None.
Return Values	ERROR_SUCCESS when successful.
Remarks	None.
Definitions	#ifdef DYNAMIC_LOADING
	typedef UINT (*PFN_StartSupplicant)();
	#else
	UINT StartSupplicant();
	#endif

StopSupplicant()

Call this function to stop the supplicant service.

		Syntax	UINT StopSupplicant( );
		Parameters	None.
		Return Values	ERROR_SUCCESS when successful.
		Remarks	None.
		Definitions	#ifdef DYNAMIC_LOADING
			typedef UINT (*PFN_StopSupplicant)();
			#else
			UINT StopSupplicant();
			#endif
		SwitchPacketDriver()
		Call this function to switch between available packet drivers on the system.
Syntax	UINT SwitchPacketDriver( USHORT );
Parameters	INTERMEC_PACKET_DRIVER			Intermec Packet Driver (ZNICZIO)
	NDISUIO_PACKET_DRIVER			Microsoft Packet Driver (NDISUIO)
Return Values	ERROR_SUCCESS when successful.
Remarks	After switching to a new packet driver, perform a warm boot for changes to take effect.
Definitions	#ifdef DYNAMIC_LOADING

typedef UINT (*PFN_SwitchPacketDriver)(USHORT); #else

UINT SwitchPacketDriver(USHORT); #endif

96 751G Color Mobile Computer User’s Manual