Intermec 751G Using Static WEP Security, Configuring Static WEP Security With Funk Security

Chapter 5 — Network Support

Using Static WEP Security

The 751G uses the Wired Equivalent Privacy (WEP) protocol to add security to your wireless network based on the 802.11b/g standard. To use WEP security, you need an access point with an 802.11b/g radio.

Configuring Static WEP Security With Funk Security

Use this procedure to set Static WEP security with Funk security.

1Make sure you have configured the communications and radio parameters on your 751G and that Funk is your security choice.

2Open Intermec Settings. Tap (+) to expand Communications > 802.11 Radio > Funk Security > Profile X with “X” being “1” through “4.”.

3For Association, select “Open” and press Enter.

4For Encryption, select “WEP” and press Enter.

5For 8021x, select “None” and press Enter.

7For Transmit key, select which WEP key to use for encryption of transmitted data.

8Define a value for each key, up to four. Enter an ASCII key or a hex key either 5 or 13 bytes long based on the radio capability. Set a 5-byte value for 64-bit WEP or a 13-byte value for 128-bit WEP. Precede hex keys with 0x and make sure the keys use 5 or 13 hex pairs.

751G Color Mobile Computer User’s Manual 125