ENGLISH
•Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Cutting accessory Contacting a “live” wire may make exposed metal parts of the tool “live” and shock the operator.
•Be certain that the material being drilled does not conceal electric or gas service and that their locations have been verified with the utility companies.
•Keep a firm grip on the tool at all times. Do not attempt to operate this tool without holding it with both hands. Operating this tool with one hand will result in loss of control. Breaking through or encountering hard materials such as
•Ensure the chisel is secured in place before operating the tool.
•In
•When working above ground level ensure the area below is clear.
•Do not touch the chisel or the parts close to the chisel immediately after operation, as they may be extremely hot and cause burns to the skin.
•Always direct the power cable to the rear, away from the chisel.
•Do not operate this tool for long periods of time. Vibration caused by hammer action may be harmful to your hands and arms. Use gloves to provide extra cushion and limit exposure by taking frequent rest periods.
Residual Risks
The following risks are inherent to the use of demolition hammers:
–Injuries caused by touching the hot parts of the tool.
In spite of the application of the relevant safety regulations and the implementation of safety devices, certain residual risks cannot be avoided. These are:
–Impairment of hearing.
–Risk of squeezing fingers when changing the accessory.
–Health hazards caused by breathing dust developed when working in concrete and/or masonry.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
DATE CODE POSITION (FIG. 1)
The Date Code (g), which also includes the year of manufacture, is printed into the housing.
Example:
2011 XX XX
Year of Manufacture
Package Contents
The package contains:
1Demolition hammer
1Side handle
1Pointed chisel
1Plastic case
1Instruction manual
1Exploded drawing
•Check for damage to the tool, parts or accessories which may have occurred during transport.
•Take the time to thoroughly read and understand this manual prior to operation.
Description (fig. 1)
a.On/off switch
b.Main handle
c.Side handle clamping knob
d.Tool retainer
e.Tool holder
f.Side handle
INTENDED USE
The D25960, D25961
DO NOT use under wet conditions or in presence of flammable liquids or gases.
These
26
