Emptying the Hole Punch Waste Container (Optional)
3.Hold the tabs on both sides of
the new booklet staple cartridge, and insert it into the original position until it clicks.
NOTE: If you have trouble inserting the cartridge, make sure that the staples in the cartridge are properly in place.
4.Repeat steps 2 and 3 to replace the other booklet staple cartridge.
5.Close the side cover of the finisher.
NOTE: If the side cover is not completely closed, a message will appear and the machine will not operate.
Emptying the Hole Punch Waste Container (Optional)
The Hole Punch Unit for the Office Finisher LX contains a hole punch waste container. When the hole punch waste container becomes full, a message appears on the touch screen. When the message is displayed, empty the hole punch waste container.
Make sure to discard all paper chads when emptying the hole punch waste container. If you do not empty the container completely, the container becomes full before a message stating to empty the container appears again, and this can cause a breakdown of the machine.
NOTE: Make sure you empty the hole punch waste container when the power is on. If you empty the container when the power is off, the machine will not recognize that the container has been emptied.
1.Make sure that the machine is not
operating, and open the front transport cover of the finisher.
2. Pull out the hole punch waste container.
37
