Xerox 5230A, 5225A manual Unix TCP/IP

Models: 5230A 5225A

1 454
Download 454 pages 48.56 Kb
Page 240
Image 240

8Printer Environment Settings

5.Repeat the test for all computers that will be sending jobs to the machine. The installation process is now complete.

If the test print fails, refer to Problem Solving chapter on page 349.

UNIX TCP/IP

This section explains how to set up the machine to operate in a UNIX TCP/IP environment. The UNIX Workstation Operating Systems (OS) supported are Solaris, SunOS, and HP-UX. The following information is provided:

Information Checklist – page 240

UNIX TCP/IP Environments – page 241 UNIX TCP/IP Installation – page 241 Installation Procedure – page 241 Network Communication Setup – page 241 Workstation Setup – page 243

Test Print – page 247 Printing – page 248 Solaris/HP-UX – page 248 SunOS – page 249 Printer Status – page 251 Solaris/HP-UX – page 251 SunOS – page 252

-C Option – page 253

Information Checklist

Before installing the UNIX TCP/IP features on the machine, make sure that the following items are available or have been performed.

Item

By

 

 

 

 

An existing operational network utilizing a UNIX TCP/IP protocol is

Customer

required. These steps are not designed to install the UNIX TCP/IP

 

network.

 

 

 

SunOS 4.1x, Solaris 1.x, 2.x, 7.x, 8.x, 9.x, 10.x, HP-UX 9.x, 10.x, 11.x

Customer

 

 

Make sure that the correct IP Address is being used for the machine.

Customer

 

 

Make sure that the Gateway Address is set correctly.

Customer

 

 

Make sure that the Subnet Mask (for IPv4) or Prefix (for IPv6) is set

Customer

correctly.

 

 

 

Make sure that the Host Name is set correctly.

Customer

 

 

Test the machine to make sure that it is fully installed and functioning

Customer

correctly.

 

 

 

If you encounter problems during the installation of the machine, refer to Problem Solving chapter on page 349.

240

Page 240
Image 240
Xerox 5230A, 5225A manual Unix TCP/IP