Scan to Home Setup
For more details about each protocol settings, refer to the following section: FTP: Scan to PC Setup (FTP) on page 291.
SMB: Scan to PC Setup (SMB) on page 292.
HTTP/HTTPS: HTTP on page 198. For HTTPS, also refer to Configuration of HTTPS (SSL/TLS) Communication Encryption on page 306.
NetWare: NetWare on page 188.
4.A repository (folder) needs to be created on the server to hold scanned documents.
Data to Set Up Network Scanning | Install | Comments | |
Requirement | |||
|
| ||
|
|
| |
|
|
| |
Templates are created via CentreWare | Required | Refer to Job Templates on page 162. | |
Internet Services or any other Xerox |
|
| |
Network Scanning Solutions. |
|
| |
|
|
| |
Repositories are created via CentreWare | Required | Refer to Network Scanning on page 209. | |
Internet Services or any other Xerox |
|
| |
Network Scanning Solutions. |
|
| |
|
|
| |
Remote Authentication Server’s IP Address | Optional | If Remote Authentication is required, | |
|
| then the Authentication feature needs to | |
|
| be enabled. | |
|
|
|
Procedure for Network Scanning Setup
1.Create templates and repositories via CentreWare Internet Services.
2.On the control panel, select [Network Scanning].
3.Select a template from the list. You can change any other value from the control panel without impacting the template configuration; only the current job will be affected.
4.Load a sample document into the document feeder.
5.Press the <Start> button on the machine. The job is sent to the server using the protocol as defined within the template.
6.Log on to the server. Navigate to the repository (folder) that was specified earlier. Your scanned document is located in that repository.
NOTE: If the authentication feature is enabled for the Network Scanning service, a separate login screen appears when [Network Scanning] is selected on the All Services screen. Users can use the service after authenticated.
Computer Setup
For more information about programming templates using CentreWare Internet Services, refer to CentreWare Internet Services on page 149.
Scan to Home Setup
The Scan to Home feature is supported through the Network Scanning service. Essentially, it is a template file (.xst) stored locally on the machine, but in a different directory than the Network Scanning templates or mailbox folders.
289
