11 Internet Fax

Internet Fax Environments

System Requirements

The following are required for the machine.

The Fax Kit and the Internet Fax Kit

The machine connected to the network using TCP/IP

The environment allowing the sending and receiving of e-mails

Item

Correspondent Specifications

 

 

 

 

ITU-T Recommendations

ITU-T T.37, T.30, F.185 and E.164

 

 

Internet Fax format

Sending:

 

RFC2301 (TIFFprofileS/F/J) and 600 x 600

 

dpi

 

Receiving:

 

RFC2301 (TIFFprofileS/F/J/C)

 

 

Facsimile forwarding

RFC2304, RFC2305

 

 

DSN function

RFC1891, 1894

 

 

MDN function

RFC2298

 

 

SMTP receiving

RFC821, 822

 

 

POP3 receiving

RFC1939

 

 

MIME version

Version1.0 (RFC2049)

 

 

NOTE: A file may not be printed if the format differs from those in the above table.

Internet Fax Installation

This section describes how to enable the Internet Fax service.

Installation Procedure

To use the Internet Fax service, configure the following settings on the machine.

Network Communication Setup

Use the touch screen to set the following ports to [Enabled].

Receive E-mail

Send E-mail

Then, set the IP address.

Finally, set the other items required for the Internet Fax service.

Test Internet Fax

An Internet Fax job should be submitted to make sure that the machine has been installed and configured correctly.

296

Page 296
Image 296
Xerox 5230A, 5225A manual Internet Fax Environments, Internet Fax Installation, Test Internet Fax