Xerox 5225A, 5230A manual Bypass Tray Tray

Models: 5230A 5225A

1 454
Download 454 pages 48.56 Kb
Page 19
Image 19

Loading Paper

NOTE: Always load paper into the tray in the orientation shown in the diagram.

3.Close the tray.

The elevator rises and positions the paper for use.

Bypass Tray (Tray 5)

Tray 5 (Bypass) allows you to use a variety of paper types. Tray 5 (Bypass) is located on the left-hand side of the machine. A tray extension is provided to accommodate larger sized paper. After loading paper stock in Tray 5 (Bypass), make sure that the Tray 5 (Bypass) settings on the touch screen match the paper size and type of stock loaded. If they do not match, reprogramming is required. For more information on programming of Tray 5 (Bypass), refer to the Copy chapter in the User Guide.

NOTE: To avoid paper jams, make sure that the paper size and paper type settings are identical to the paper stock loaded.

1.Load the paper neatly into Tray

5 (Bypass), making sure that the paper stock is in the center of the tray.

NOTE: Do not load paper above the maximum fill line.

NOTE: When making single/double sided copies on perforated paper,

load the paper to feed the opposite side of the perforated edge first. Feeding the perforated edge first might cause paper jams.

NOTE: If, when making copies or prints on thick-stock paper, the paper will not feed into the machine, apply a curl to the paper as shown in the illustration above. Note however, that excessively bending or folding the paper might cause paper jams.

NOTE: When loading envelopes, make sure the flaps are closed and

that the envelopes are oriented on the tray so that the edge with the flaps will enter the machine first. However, when loading C5-size envelopes, set them long edge feed so that the edge with the flaps will face toward you.

2.Slide the side guides towards the paper until they are just touching the edge of the stock.

19

Page 19
Image 19
Xerox 5225A, 5230A manual Bypass Tray Tray