Xerox 5225A, 5230A manual NetWare, EtherTalk, Bonjour, Port

Models: 5230A 5225A

1 454
Download 454 pages 48.56 Kb
Page 91
Image 91

System Settings

Port Status

Specifies whether to enable the USB port.

Print Mode

Specifies the PDL to be used for print jobs. Only pre-installed PDLs are available.

PJL

Specifies whether to enable the PJL (Printer Job Language).

Auto Eject Time

Specifies the time-out period when print data is not sent to the machine sequentially. If the specified time elapses, the remaining data inside the machine is automatically printed out. You can enter a time within the range of 5-1,275 seconds in 5-second increments.

Adobe Communication Protocol

Specifies the communication protocol format for Adobe Communication Protocol.

Standard - Select this option when the communication protocol is in ASCII format.

Binary - Select this option when the communication protocol is in binary format. Depending on the data, the print job may be completed faster than [Standard].

TBCP - Select this option to switch the specific control codes when the communication protocols involve both ASCII and binary formats.

RAW - Select this option when the communication protocol is in RAW format. Using this option allows you to correctly print EPS files from a Macintosh computer via USB.

LPD

Specifies whether to enable the LPD port, and specifies the port number and the maximum number of sessions.

NetWare

Specifies whether to enable the NetWare port.

SMB

Specifies whether to enable the SMB port.

IPP

Specifies whether to enable the IPP port, and specifies the port number.

EtherTalk

Specifies whether to enable the EtherTalk port.

Bonjour

Specifies whether to enable the Bonjour port.

Port 9100

Specifies whether to enable the Port 9100 port, and specifies the port number.

SNMP

Specifies whether to enable the SNMP agent.

91

Page 91
Image 91
Xerox 5225A, 5230A manual NetWare, EtherTalk, Bonjour, Port