Nov 05 Version | Accusys eXpeRAID instruction

eXpeRAID

Command Line Interface

User Guide

Nov 05, 2007

Version: 1.0

Image 1

Accusys eXpeRAID manual EXpeRAID Command Line Interface User Guide, Nov 05 Version

Contents

Nov 05 Version EXpeRAID Command Line Interface User Guide Revision History Contents Basic Array Configuration Commands Appendix UpdateSystemCode UpdateBootCode UpdateBIOSEFI Supported Operating Systems Overview Example for Linux special case Pre-action Interactive Mode Execution ModeNon-interactive Mode ACCUSYS, INC Command Syntax CLI Command FormatCommand Name Format 1 …Format n Format Conventions CLI Reply Status InBandController command success InBand command failed Basic CLI Commands CLI Command SetCommand Name Command Description CLICheckPassword 00000000 Enter Example CLICtrlName Ctrl1 Enter CLIDumpArrayInfo 1 Enter Information Display Commands 2.7 2.62.8 2.9 3.1 Basic Array Configuration CommandsRAID Level Level=R0R1R5R6 R0 RAID Level R01 R1 RAID Level R5 RAID Level CLISetSlice Array=1 Slice=0 Size=120 Enter CLIDeleteArray 1 Enter CLISetLunMap Lun=0 Array=1 Slice=0 Enter CLISetLunMap Lun=0 JBOD=1 Enter CLIExpandArray Array=1 DriveCnt=3 Enter Advanced Array Configuration CommandsCLIMigrateArray Array=1 TargetLevel=R5 DriveCnt=4 Enter Example CLIRefreshArray Array=1 State=StartEnter Example CLIRebuildParity Array=1 State=Start Enter Mirror Snapshot Configuration Commands CLISplitScheduling Shot=1 Year=07 Month=12 Day=15 Hour=0 Parameter ExampleMin=0 Enter Parameter EnableDisable Enable / Disable Disk Lag Proof mode 6.2 Miscellaneous CommandsEnableDisable Enable / Disable NCQ mode 6.3 5.6 EnableDisable Enable / Disable Equalization Mode 6.7 EnableDisable Enable/Disable controller beeper 6.6EnableDisable Enable/Disable controller cache 6.8 EnableDisable Enable/Disable Synchronize Cache mode 6.9 CtrlTime Use this command to set controller timeMonth Month =1~12 Day Day =1~31 7.1 Firmware Update Commands R0 N Disks Array Migration MatrixR1 N Disks R5 N Disks R0+1 N Disks