ACCUSYS, INC.
5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.
TITLE | EXPERAID COMMAND LINE INTERFACE USER GUIDE |
| |||
PROJECT |
| “DESKTOP RAID” | DOCUMENT STATUS | OFFICIAL RELEASE | |
REV. |
|
| PAGE 16 OF 27 | ||
3.3.3 Basic Array Configuration Commands
3.3.3.1
Command Name |
| Command Description |
CreateArray |
| Use this command to create an array with specified RAID level. |
Parameter 1 |
| Parameter Description |
RAID Level: |
| RAID Level: |
<Level=<R0:R1:R5:R6: |
| R0: RAID Level 0 |
R01>> |
| R1: RAID Level 1 |
Parameter 2 |
| R5: RAID Level 5 |
Stripe Size: |
| R6: RAID Level 6 |
<Stripe=<8:16:32:64:128:2 |
| R01: RAID Level 0+1 |
56>> |
| Stripe Size: |
Parameter 3 |
| |
Initialization Type: |
| Measures in KB. |
<Type=<Fly:Evaluation>> |
| 1 KB=2 Blocks. |
Parameter 4 |
| Initialization Type: |
Member Drives: |
| |
<Drive=<z1,x~y,z2>> |
| Fly: |
|
| Evaluation: Performance evaluation |
|
| Member Drives: |
|
| Drive=<z1,x~y,z2> |
|
| where z1, z2, x and y stand for drive numbers and y must be larger |
|
| then x. |
|
|
|
Example
CLI>CreateArray Level=R5 Stripe=128 Type=Fly Drive=3,4,6~8 [Enter]
Array will be created with drive 3,4,6,7,8 with an unused array number if all specified drives are available. If all array numbers have been used CLI will reply error.
