ACCUSYS, INC.
5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.
TITLE | EXPERAID COMMAND LINE INTERFACE USER GUIDE |
| |||
PROJECT |
| “DESKTOP RAID” | DOCUMENT STATUS | OFFICIAL RELEASE | |
REV. |
|
| PAGE 18 OF 27 | ||
3.3.3.6
Command Name |
| Command Description |
SetLunMap |
| Use this command to set a Lun Map for an existing slice or JBOD. |
Parameter 1 |
| Parameter Description |
LUN No.: |
| LUN No.: |
<Lun=<0~63>> |
| Specify the Lun number to be mapped. |
Parameter 2 |
| Array No.: |
Array No.: |
| |
<Array=<1~4>: |
| Array =1~4, Maps Lun to a specified Array |
JBOD= <1~n>> |
| JBOD=1~n, Maps Lun to a specified JBOD |
|
| Slice No.: |
Parameter 3 |
| |
Slice No.: |
| This parameter is not needed when parameter 2 uses JBOD. |
<Slice= <0~15>> |
|
|
|
|
|
|
| Example |
|
| CLI>SetLunMap Lun=0 JBOD=1 [Enter] |
|
| Lun 0 will be mapped to JBOD1 if it exists. |
|
| CLI>SetLunMap Lun=0 Array=1 Slice=0 [Enter] |
|
| Lun 0 will be mapped to slice 0 of array 1 if it exists. |
3.3.3.7 |
|
|
Command Name |
| Command Description |
DeleteLunMap |
| Use this command to delete an existing Lun Map. |
Parameter 1 |
| Parameter Description |
LUN No.: |
| Lun No.: |
<0~63> |
| Specify the Lun number to be unmapped. |
|
|
|
