Accusys eXpeRAID manual 6.4, EnableDisable Enable/Disable controller beeper 6.6

					ACCUSYS, INC.
				5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.
	TITLE	EXPERAID COMMAND LINE INTERFACE USER GUIDE
	PROJECT		“DESKTOP RAID”		DOCUMENT STATUS	OFFICIAL RELEASE
	REV.	G–05-NOV-2007				PAGE 24 OF 27
3.3.6.4
Command Name				Command Description
SMARTPollingPeriod				Use this command to set the polling frequency of SMART pre-failure
				warning mode.
Parameter 1				Parameter Description
Polling Time:				Polling Time:
<1Min:15Min:30Min:				Set Polling Time as the SMART polling period.
60Min:2Hr:4Hr:8Hr>
3.3.6.5
Command Name				Command Description
BeeperMode				Use this command to enable or disable the controller beeper.
Parameter 1				Parameter Description
<Enable:Disable>				Enable/Disable controller beeper.
3.3.6.6
Command Name				Command Description
EQMode				Use this command to enable or disable Equalization Mode.
Parameter 1				Parameter Description
<Enable:Disable>				Enable / Disable Equalization Mode.
3.3.6.7
Command Name				Command Description
CtrlCache				Use this command to enable or disable controller cache.
Parameter 1				Parameter Description
<Enable:Disable>				Enable/Disable controller cache.
3.3.6.8
Command Name				Command Description
SyncCacheMode				Use this command to enable or disable Synchronize Cache mode.
Parameter 1				Parameter Description
<Enable:Disable>				Enable/Disable Synchronize Cache mode.