Accusys eXpeRAID manual Firmware Update Commands, 7.1

ACCUSYS, INC.

5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.

TITLE	EXPERAID COMMAND LINE INTERFACE USER GUIDE
PROJECT		“DESKTOP RAID”	DOCUMENT STATUS	OFFICIAL RELEASE
REV.	G–05-NOV-2007			PAGE 26 OF 27

3.3.7 Firmware Update Commands

3.3.7.1

Command Name	Command Description
UpdateSystemCode	Update system code for the active controller. The controller needs to be
	restarted for the new system code to take effect.
Parameter 1	Parameter Description
File Path:	File Path:
<[DIR] <FileName>>	Specify an existing System Code image file(FileName) located in the
	specified directory.
3.3.7.2
Command Name	Command Description
UpdateBootCode	Update boot code for the active controller. The controller needs to be
	restarted for the new boot code to take effect.
Parameter 1	Parameter Description
File Path:	File Path:
<[DIR] <FileName>>	Specify an existing Boot Code image file(FileName) located in the
	specified directory.
3.3.7.3
Command Name	Command Description
UpdateBIOSEFI	Update BIOS and EFI firmware for the active controller. The controller
	needs to be restarted for the new BIOS/EFI to take effect.
Parameter 1	Parameter Description
File Path:	File Path:
<[DIR] <FileName>>	Specify an existing BIOS/EFI image file(FileName) located in the
	specified directory.