Transition Networks MIL-SM802GAF, MIL-SM8TXAF2GPA user manual SNTP Commands Set

event	G	Set X-ring topology	switch(config)#event
X-ring-topology-change		changed event type	X-ring-topology-change both
[SystemlogSMTPBoth]
event systemlog	I	Set port event for	switch(config)#interface
[Link-UPLink-DownBot		system log	fastethernet 3
h]			switch(config-if)#event systemlog
			both
event smtp	I	Set port event for	switch(config)#interface
[Link-UPLink-DownBot		SMTP	fastethernet 3
h]			switch(config-if)#event smtp both
show event	P	Show event selection	switch#show event
no event	G	Disable cold start	switch(config)#no event
device-cold-start		event type	device-cold-start
no event	G	Disable Authentication	switch(config)#no event
authentication-failure		failure event typ	authentication-failure
no event	G	Disable X-ring	switch(config)#no event
X-ring-topology-change		topology changed	X-ring-topology-change
		event type
no event systemlog	I	Disable port event for	switch(config)#interface
		system log	fastethernet 3
			switch(config-if)#no event
			systemlog
no event smpt	I	Disable port event for	switch(config)#interface
		SMTP	fastethernet 3
			switch(config-if)#no event smtp
show systemlog	P	Show system log client	switch#show systemlog
		& server information

SNTP Commands Set

Commands	Level	Description	Example
sntp enable	G	Enable SNTP function	switch(config)#sntp enable

43