Transition Networks MIL-SM8TXAF2GPA Trunk Commands Set, Enable Disable, 1~65535, Group ID

state	I	Use the state interface	switch(config)#interface
[Enable Disable]		configuration	fastEthernet 2
		command to specify	(config-if)#state Disable
		the state mode of
		operation for Ethernet
		ports. Use the disable
		form of this command
		to disable the port.
show interface	I	show interface	switch(config)#interface
configuration		configuration status	fastEthernet 2
			switch(config-if)#show interface
			configuration
show interface status	I	show interface actual	switch(config)#interface
		status	fastEthernet 2
			(config-if)#show interface status
show interface	I	show interface statistic	switch(config)#interface
accounting		counter	fastEthernet 2
			(config-if)#show interface
			accounting
no accounting	I	Clear interface	switch(config)#interface
		accounting information	fastEthernet 2
			switch(config-if)#no accounting

Trunk Commands Set

Commands	Level	Description	Example
aggregator priority	G	Set port group system	switch(config)#aggregator priority
[1~65535]		priority	22
aggregator activityport	G	Set activity port	switch(config)#aggregator
[Group ID]			activityport 2
[Port Numbers]
aggregator group	G	Assign a trunk group	switch(config)#aggregator group

27