Transition Networks MIL-SM802GAF, MIL-SM8TXAF2GPA user manual VLAN Commands Set

VLAN Commands Set

Commands	Level	Description	Example
vlan database	P	Enter VLAN configure	switch#vlan database
		mode
Vlanmode	V	To set switch VLAN	switch(vlan)#vlanmode portbase
[portbase 802.1q		mode.	or
gvrp]			switch(vlan)#vlanmode 802.1q
			or
			switch(vlan)#vlanmode gvrp
no vlan	V	No VLAN	Switch(vlan)#no vlan
Ported based VLAN configuration
vlan port-based	V	Add new port based	switch(vlan)#vlan port-based
grpname		VALN	grpname test grpid 2 port 2-4
[Group Name]			or
grpid			switch(vlan)#vlan port-based
[GroupID]			grpname test grpid 2 port 2,3,4
port
[PortNumbers]
show vlan [GroupID]	V	Show VLAN	switch(vlan)#show vlan 23
or		information
show vlan
no vlan group	V	Delete port base group	switch(vlan)#no vlan group 2
[GroupID]		ID
		IEEE 802.1Q VLAN
vlan 8021q name	V	Change the name of	switch(vlan)#vlan 8021q name
[GroupName]		VLAN group, if the	test vid 22
vid
[VID]		group didn’t exist, this
		command can’t be
		applied.
vlan 8021q port	V	Assign a access link	switch(vlan)#vlan 8021q port 3
[PortNumber]		for VLAN by port, if the	access-link untag 33
access-link untag
[UntaggedVID]
		29