Port Trunk – Aggregator Information interface
Port Trunk - State Activity
When you had setup the LACP aggregator, you can configure port state activity. You can
mark or
Apply |
button the port
state activity will change to Active. Opposite is Passive.
Active: The port automatically sends LACP protocol packets.
Passive: The port does not automatically send LACP protocol packets, and responds only if it receives LACP protocol packets from the opposite device.
Note 1. A link has either two active LACP ports or one active port can perform dynamic LACP trunk.
2.A link has two passive LACP ports will not perform dynamic LACP trunk because both ports are waiting for an LACP protocol packet from the opposite device.
3.If you are active LACP’s actor, after you have selected trunk port, the active status will be created automatically.
67
