Transition Networks user manual Commands Set List, System Commands Set, show config, show terminal

Commands Set List

User EXEC	E
Privileged EXEC	P
Global configuration	G
VLAN database	V
Interface configuration	I

System Commands Set

Commands	Level	Description	Example
show config	E	Show switch	switch>show config
		configuration
show terminal	P	Show console	switch#show terminal
		information
write memory	P	Save user	switch#write memory
		configuration into
		permanent memory
		(flash rom)
system name	G	Configure system	switch(config)#system name xxx
[System Name]		name
system location	G	Set switch system	switch(config)#system location
[System Location]		location string	xxx
system description	G	Set switch system	switch(config)#system
[System Description]		description string	description xxx
system contact	G	Set switch system	switch(config)#system contact
[System Contact]		contact window string	xxx
show system-info	E	Show system	switch>show system-info
		information
ip address	G	Configure the IP	switch(config)#ip address
[Ip-address]		address of switch	192.168.16.1 255.255.255.0
[Subnet-mask]			192.168.16.254

22