Transition Networks MIL-SM802GAF, MIL-SM8TXAF2GPA user manual with LACP active

[GroupID] [Port-list]		with LACP active.	1 1-4 lacp workp 2
lacp		[GroupID] :1~4	or
workp		[Port-list]:Member port	switch(config)#aggregator group
[Workport]		list, This parameter	2 1,4,3 lacp workp 3
		could be a port
		range(ex.1-4) or a port
		list separate by a
		comma(ex.2, 3, 6)
		[Workport]: The
		amount of work ports,
		this value could not be
		less than zero or be
		large than the amount
		of member ports.
aggregator group	G	Assign a static trunk	switch(config)#aggregator group
[GroupID] [Port-list]		group.	1 2-4 nolacp
nolacp		[GroupID] :1~4	or
		[Port-list]:Member port	switch(config)#aggregator group
		list, This parameter	1 3,1,2 nolacp
		could be a port
		range(ex.1-4) or a port
		list separate by a
		comma(ex.2, 3, 6)
show aggregator	P	Show the information	switch#show aggregator 1
		of trunk group	or
			switch#show aggregator 2
			or
			switch#show aggregator 3
no aggregator lacp	G	Disable the LACP	switch(config)#no aggreator lacp
[GroupID]		function of trunk group	1
no aggregator group	G	Remove a trunk group	switch(config)#no aggreator
[GroupID]			group 2
		28