NEC MT830 user manual Using the Viewer function, E-33

Using the Viewer function

If you use the Viewer function on the LCD projector, you must first install the optional MT Viewer board (VK-MT) in the LCD projector and set up the exclusive software included with the VK-MT kit.

See the user's manual included with the VK-MT for installing and uninstalling the software.

Mounting the Optional MT Viewer Board To install the Viewer board:

1. Set the LCD projector on end with the carrying handle up.

NOTE: Be sure to unplug the LCD projector before installing the Viewer board.

4.Insert the optional viewer board into the slot. Be sure to push the board until the board is securely fitted.

2. Remove the two screws from the bottom.

3.Remove the slot cover by pushing up on the catch of the cover with a flat-head screwdriver until you feel it detach.

5.Secure the board in place with the two screws that you removed in step 2.

6. Put the LCD projector back in the original position.

E-33