NEC MT830 Remote Control Features, Left Click Button, Laser Pointer, Infrared Transmitter, E-11

Remote Control Features

You can use your remote control with the cable or wireless to operate your MultiSync MT830/1030 LCD Projector. With the mouse output port connected to your computer, you can also use the projector's remote control to operate your computer's mouse wireless. (See page E-25 to connect your computer to the mouse output port.)

If you want to use your remote control with the cable, connect one end of the cable to the jack on the remote control and the other end to the Terminal Panel.

NOTE: If you are using a Macintosh computer, you can click either the right or left button to activate the mouse.

1	Left Click Button
	Use this button to enter your menu selection. It works the
	same as the "Enter" button on the cabinet.
2	Laser Pointer
	Beams a laser light when "Laser" button is pressed.
3	Infrared Transmitter
	Direct the remote control toward the remote sensor on the
	projector cabinet.
4	LED
	Flashes when any button is pressed.
5	Power On And Off
	If your main power switch is turned on, you can use this
	button to turn your MultiSync MT830/1030 LCD Projector

2

6

OFF POWER

VIDEO S-VIDEO

1

3

4

5

ON

	on and off.
6	Video Button
	Press to select an NTSC, PAL, SECAM or NTSC4.43 com-
	patible video source from a VCR, DVD player, laser disc
	player or document camera.
7	S-Video Button
	Press to select an S-Video source from a VCR.
8	RGB 1 Button
	Press to select a video source from a computer connected to
	your RGB 1 port.
9	RGB 2 Button
	Press to select a video source from a computer connected to
	your RGB 2 port.
10 PC Card Button
	Press to display a slide from the flash memory card inserted
	in the PC card slot of your LCD projector. (You must first
	install the optional MT Viewer board into your LCD projec-
	tor.)

7

8

9

RGB 1 RGB 2 PC CARD

10

MENULASER

–+

R-CLICK/CANCEL

POINTER PIC-MUTE FREEZE

MAGNIFY SLIDE VOLUME

+ + +

– – –

ZOOM FOCUS KEYSTONE

+ + +

– – –

E-11