2INSTALLATION

This section describes how to set up your MultiSync MT830/ 1030 LCD projector and how to connect video and audio sources.

Setting Up Your MultiSync MT830/ 1030 LCD Projector

Your MultiSync MT830/1030 LCD Projector is simple to set up and use. But before you get started, you must first:

1.Determine the image size

2.Set up a screen or select a non-glossy white wall onto which you can project your image.

Carrying The LCD Projector Always carry your LCD projec- tor by the handle. Ensure that the power cord and any other cables connecting to video sources are disconnected before moving the projector. When moving the projector or when it is not in use, cover the lens with the lens cap.

Attaching the lens cap to the lens hood

with the supplied string and rivet.

Lens cap

 

Selecting A Location The further your LCD projector is from the screen or wall, the larger the image. The minimum size the image can be is approximately 0.5 m (20") measured diago- nally when the projector is roughly 1.0 m from the wall or screen. The largest the image can be is 7.6 m (300") when the projector is about 12.2 m from the wall or screen.

Rivet

String

Projection distance

Width

 

 

 

 

Screen size

Height

 

 

(diagonal)

 

 

 

 

 

 

 

 

 

Diagonal Screen Size (inch)

Projection Distance and Image Size

350

 

 

 

 

 

 

 

300”

300

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

250

 

 

 

 

 

 

 

 

 

200

 

 

 

 

 

 

 

235”

 

 

 

 

 

 

 

 

 

150

 

 

 

WIDE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

100

 

 

 

TELE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

50

27”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

20”

 

 

 

 

 

 

 

 

 

6.56

13.12

19.69

26.25

32.81

40.03

ft.

0.0

 

 

(2.0)

(4.0)

(6.0)

(8.0)

(10.0)

(12.2) (m)

Throw Distance

E-14

Page 15
Image 15
NEC user manual Installation, Setting Up Your MultiSync MT830/ 1030 LCD Projector