NEC MT830 user manual Projecting Slides, Multi Cursor

Projecting Slides

Orientation of flash memory card insertion

The flash memory card has a front and a back side and the flash memory card is designed to be inserted in only one orientation. The card is designed so that it cannot be inserted in reverse, but trying to insert it forcefully might break the pins inside the slot or ruin the flash memory card slot. See the flash memory card manual for information about the orientation of the flash memory card.

-ATA	Card
IA
PCMC Memory
Flash

*The type of flash memory card required for use in the LCD projector is a Type II PCMCIA-ATA flash memory card (not supplied). Never use other types of PC card than this. Doing so can break the slot or ruin the PC card.

4.Select a file or a slide.

Use the Mouse pad (+) or (–) button on the remote control to select the file or slide you want to display and press the Enter button on the cabinet or the Left Click button on the remote control. See the following pages for more details.

Multi Cursor

1	2	3		4
File	File	File		File
File	File	File		File	Table Cursor
5	6	7		8
			A	B		C	D
			presentation presentation presentation presentation
			E	F		G	H
			presentation presentation presentation presentation

To Project the Slides (the presentation materials)

1. Insert a flash memory card into the PC card slot.

* To eject the flash memory card, press the Eject button.

NOTE: Should the card be difficult to insert, do not forcefully push the card in.

2. Select the PC card as a source.

*Press the Menu button on the remote control or projector cabinet and select "PC CARD" from the Source menu.

*If there is no flash memory card in the card slot, the LCD projector displays a blue back or black back image.

3. Select "Select File" or "Select Slide".

*Use the Mouse pad (+) or (-) button on the remote control to select "Select File" or "Select Slide".

* The selected file or slide will be displayed.

NOTE: If you select "Start" and press the Enter button on the cabinet or the Left Click button on the remote control, the slides will be looped. To use the Start feature, you must first set on the software included with the MT Viewer board.

NOTE: The Mouse pad (+) or (–) button is valid only when the Menu button is lit.

E-34