11 Laser Button
Press and hold this button to activate the laser pointer. When lit, you can use the laser to draw your audience's attention to a red dot that you can place on any object within 10 m.
12 Menu Button
Use this button to call up the
If no buttons are pressed within 10 seconds while it illumi- nates, the light goes out. To return to the main menu from a submenu, press this button again.
13 Mouse Pad(▲▼◀ ▶ /+ -)
Works as a mouse for your projected computer image. This pad is also used to adjust position.
This pad selects the submenu you want to adjust. (See page
After you make your
14 Right Click/Cancel Button
Press this button to exit "Menus" or "Pointer."
15 Freeze Button
This button will freeze a picture. Press again to resume motion.
16 Picture Mute Button
This button turns off the image for a short period of time. Press again to restore the image.
17 Pointer Button
Use this button to move your Pointer icon to the area you want on the screen, then press the Magnify button on the remote control to enlarge the selected area on the screen.
When you're finished, the "Pointer" button will remain lit for 10 seconds.
NOTE:
*Eight kinds of Pointers (icons) are available. You can select one from the Settings Menu. The magnifying glass icon is selected at the factory. See page
*With the Pointer button pressed, the Mouse Pad is used to move the picture.
18 Volume Button
Press (+) to increase the volume and (-) to decrease it.
OFF | POWER | ON |
VIDEO |
| |
RGB 1 | RGB 2 | PC CARD |
MENU |
| LASER |
12 |
| 11 |
13
–+
|
| 14 |
POINTER | ||
17 |
| 15 |
MAGNIFY | SLIDE | 16 |
VOLUME | ||
+ | + | + |
|
| 18 |
– | – | – |
ZOOM | FOCUS KEYSTONE | |
+ | + | + |
– | – | – |
